home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ian & Stuart's Australian Mac 1
/
Ian and Stuart's One (Australia).iso
/
Australasian Legends
/
Commercial
/
Graphic Magic
/
Multiframe US Demo
/
Multiframe3D demo
/
Multiframe3D demo.rsrc
/
STR#_256.txt
< prev
next >
Wrap
Text File
|
1991-11-25
|
3KB
|
327 lines
Reading from file "
Reading from text file "
Reading from DXF file "
The text file does not appear to be in the correct format
Not enough memory to read in results
This is an newer format file and can not be read
Could not fit the stiffness matrix in memory
Use Page Layout to set up printing areas before printing
Can not have more than seven load cases with dynamics
There are no loads on the structure
There are not sufficient restraints on the structure
Caution: Some joints are fully pinned; Ensure that all joints are properly restrained
All the section types have not been defined
√òz
√òy
√òx
Mz
My
Mx
z
There is not enough memory to do that
Generate Arc
Generate Beam
Span
Rotate
You can not drag a member on top of an existing member
Some of the sections used in the structure are missing from the Sections Library
AF
D
SF
BM
Mbr
Batch solution in progress…
Delete Member
Drag
Delete Case
Edit Case
Add Case
Add Self Weight
Thermal Load
Member Load
Free Member
Joint Load
Free Joint
Generate Portal
Generate
Member Type
Section Type
Displacement
Spring
Restraint
Subdivide
Delete Member
Add Member
Paste
Untitled
Caution: The number of groups stored with the structure doesn't match the number in the section library
Caution: Some library sections used in this structure have been changed since it was saved
‚àëMz
‚àëFy
‚àëFx
Sum of Reactions
Member Actions
Reactions
Displacements
There are no thermal loads in
Depth
Therm Coeff
Bottom Temp
Top Temp
Thermal Loads
There are no member loads in
Fs
Fa
Ws
Wa
Wy
Wx
Right Mag
Left Mag
Right Dist
Left Dist
Load Type
Member Loads
There are no joint loads in
Mz
Fy
Fx
Joint Loads
There are no springs
Ktheta
Ky
Kx
Joint Springs
There are no joint restraints or prescribed displacements
Joint Restraints and Prescribed Displacements
Total Mass
Section Properties
None
Rigid/Pinned
Rigid/Rigid
Pinned/Rigid
Pinned/Pinned
Joint 2
Joint 1
Spare
Member Geometry
Joint Coordinates
The solution does not make sense - Please check the structure, restraints and section properties
Mz
Ry
Rx
Rotation
y Disp
x Disp
Dist
Value
Min
Max
Hz
Frequency
y-y
x-x
Member
Joint
Joint Displacements
Joint Reactions
Structure has not been analyzed
Axial
Deflection
Shear
Moment
Solution in progress....
Solution in progress...
Not enough memory to analyze this structure: ^0k needed, ^1k available
Mode Shape
(Self Wt)
(Combined)
Self Weight
Caution: There are sections in the structure with zero mass - proceed anyway?
The mass values for some sections are not valid numbers
Self weight can not be calculated until all the section types have been specified
You can not duplicate members on top of existing members
Duplicate
Move Origin
Move Selection
Rescale
You can not collapse a member to zero length
You can not add a member on top of an existing member
Slope
Length
z=
y=
x=
z
y
x
You can not delete all load cases
That name is not allowable
Factor
The numbers entered do not make sense
Undo
Load Case